Flashworks Electrical Service Load Calculations, 2008 Edition

Updated to work hand-in-hand with the 2008 NEC!

FlashWorks™ is simply the fastest and best way for licensed professionals in the Electrical Industry to perform accurate Electrical Service Load Calculations including: Panel Sizing & Balancing, Conductor & Conduit Sizing, Short Circuit Calculation, and Voltage Drop Calculations for both Residential, Commercial and Industrial buildings. FlashWorks™ is designed to guide Building Industry Professionals quickly through Electrical Service Load Calculations based on the 2008 National Electrical Code® NFPA 70®.

FlashWorks takes the work out of the calculation process! Calculations can be performed as fast as one can enter the information into the predesigned entry screens. A click of the mouse and the Calculation is complete, and displayed on the screen. Then with the selection of Panel Sizing the panels can be determined. Parallel conductors and conduits are sized. Finally, one can determine the short circuit calculation for the AIC rating of the overcurrent protective device.

This program is designed for use by licensed professionals in the Electrical Industry. Licensed Electricians, Electrical Contractors, Engineers, Architects, Inspectors, Building Code Officials. It is not for unlicensed electricians or to be used for home improvement projects! Professionals are persons who are trained in the Standards for Electrical design covered by the National Electrical Code NFPA 70.

Panel Balancing - you can balance a 42 circuit, three phase panel or single phase panel in under 3 seconds! Then, by just entering the circuit names and answering a few pop up questions, the program sizes breakers conductors and conduit.

Printing Capabilities - you can print from every calculation screen.

Voltage Drop Calculations - you can perform "what if" scenarios.

Platforms: Vista 32; Windows XP Pro, XP, 2000!